Scotch-Brite(TM) EX2 Deburring Wheel, 6 in x 1 in x 1 in 8A MED, 3 per case
Product Info
0) 17217 EX2 DEBURRING WHEEL
Scotch-Brite TM EX2 Deburring Wheel 6 in x 1 in x 1 in 8A MED 3 per case
Our high performance combination of mineral (aggressiveness) and density (hardness) make the Scotch-Brite™ EX2 wheel uniquely suited to applications where a moderate degree of conformability, wheel hardness, and edge retention are needed. A unique resin system helps minimize smearing and reduces heat build-up. The EX2 Deburring Wheel runs cool and resists loading due to its open-web construction. We did this to reduce the risk of part discoloration and warping, while extending the life of the wheel. The EX2 Deburring Wheel is available in fine and medium grade abrasives.
Our Scotch-Brite™ EX2 Deburring Wheel is available with silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. We chose an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
- Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites
- Tough, layered, unitized construction can operate clockwise or counterclockwise directions
- Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications
- Resists smearing for cleaner surfaces and less preparation
- Minimizes heat build up to lessen impact on heat-sensitive materials
Abrasive Material | Aluminum Oxide |
Application | - Finishing - Deburring - Polishing |
Attachment Type | Center Hole |
Center Hole Diameter (Imperial) | 1 in |
Center Hole Diameter (Metric) | 25.4 mm |
Color Family | Gray |
Equipment - Machines | - Inline Sanders - Manual Backstand |
Face Width (Imperial) | 1 in |
Face Width (Metric) | 25.4 mm |
Form Type | Convolute/Deburring |
For Use On | - Composites - Glass |
Grade | Medium |
Max RPM | 6000 |
Overall Diameter (Imperial) | 6 in |
Overall Diameter (Metric) | 152.4 mm |
Overall Width (Imperial) | 1 in |
Overall Width (Metric) | 25.4 mm |
Product Color | Gray |
Product Form | Wheel |
Product Number | X2-WL |
Substrate | - Glass - Composites |
ECCN | EAR99 |
Item Specifications
-
0.85 lbs per EA