3M™ Double Coated Polyethylene Foam Tape 4466, White, 1 in x 36 yd, 62 mil, 9 rolls per case
Product Info
24302 DBL CTD PLYTHYLN FM TP 4466 WHT 1I
3M Double Coated Polyethylene Foam Tape 4466, White, 1 in x 36 yd, 62 mil, 9 rolls per case; 1 Roll = 1 Roll; 1 Case = 9 Roll; 1 Pallet = 324 Roll
Flexible Foam Tape for Irregular Surfaces
Speed up the mounting process and achieve a more aesthetically pleasing installation with 3M™ Double Coated Polyethylene Foam Tape 4466. This 1/16 in. thick polyethylene foam tape is known for its high ultimate adhesion and reliable performance across many surfaces. One of its noted features is its ability to conform to irregular and low surface energy substrates. It provides high ultimate adhesion to many plastics and is formulated for demanding indoor and general purpose mounting and bonding applications. Common uses include decorative trim, nameplates and other general purpose mounting applications.
Recommended Application
- Indoor general purpose mounting and joining
- Decorative trim
- Nameplate mounting
- Point-of-purchase displays and signs
Benefits of Double Coated Tape
3M double coated tapes offer speed, strength and improved aesthetics to your mounting application. Instead of mechanical fasteners such as screws, bolts and studs, double coated tapes leave no puncture holes. Our tapes can be easily applied by hand or with a dispenser, with no special application equipment required for a firm bond.
What is Double Coated Tape?
In general, double coated tape is composed of a foam, paper, film, or tissue carrier that is coated on both sides with pressure sensitive adhesive. The adhesive is protected by a peel-away liner that can be removed at the time of application or left in place until the joining surfaces are ready to be attached. Applications for double coated tape are found in construction, fabrication, arts, and hobby. For bonding rough or irregular surfaces, 3M™ Double Coated Foam Tapes fill gaps and distribute stress uniformly over the bonded area.
- Black or white, 0.062 in. (1.6 mm) closed-cell polyethylene foam carrier
- High ultimate adhesion to a wide variety of surfaces
- Conformable tape bonds to irregular surfaces
- Unique rubber adhesive system provides quick stick
- Adheres well to most low surface energy (LSE) materials
| Adhesive Permanence | No |
| Adhesive Type | - Conformable Acrylic - Rubber |
| Backing Material | Polyethylene Foam |
| Backing Thickness (Imperial) | 55.85 mil |
| Backing Thickness (Metric) | 1.42 mm |
| Carrier Material | Polyethylene |
| Color Family | White |
| Density (Metric) | 60 kg/m³ |
| Indoor/Outdoor | Indoor |
| Maximum Load (Imperial) | 2.2 lb. |
| Maximum Load (Metric) | 1 kg |
| Maximum Operating Temperature (Celsius) | 38 Degree Celsius |
| Maximum Operating Temperature (Fahrenheit) | 100 Degree Fahrenheit |
| Minimum Operating Temperature (Celsius) | 21 Degree Celsius |
| Minimum Operating Temperature (Fahrenheit) | 70 Degree Fahrenheit |
| Net Weight (Imperial) | 7.94 lb |
| Net Weight (Metric) | 3.6 kg |
| Overall Height (Imperial) | 62.5 mil |
| Overall Height (Metric) | 1.6 mm |
| Overall Length (Imperial) | 36 yd |
| Overall Length (Metric) | 32.9 m |
| Overall Thickness (Imperial) | 62 mil |
| Overall Width (Imperial) | 1 in |
| Overall Width (Metric) | 2.5 cm |
| Primary Liner | 58# Densified Kraft Paper |
| Primary Liner Color | White |
| Primary Liner Thickness (Imperial) | 3.15 mil |
| Primary Liner Thickness (Metric) | 0.08 mm |
| Product Color | White |
| Product Form | Roll |
| Product Key | 4466W |
| Product Number | 4466 |
| Specifications Met | ASTM D3654 |
| Substrate 1 | Powder Coated Aluminum |
| Substrate 2 | Copper |
| Tape Width (Imperial) | 1 in |
| Temperature Resistance - Initial | 158 Degree Fahrenheit |
| Tensile Strength (Imperial) | 60 lb/in |
| Tensile Strength (Metric) | 414 kPa |
| Total Tape Thickness without Liner (Imperial) | 59 mil |
| Total Tape Thickness without Liner (Metric) | 1.5 mm |
| ECCN | EAR99 |
Item Specifications
-
0.88 lbs per EA
Export To PDF