Browse Categories

SIKAPRIMER 207 250ML BOTTLE

SIKAPRIMER 207 250ML BOTTLE
Item #: 83067768

Product Info

417302
SIKA

SIKAPRIMER 207 250ML BOTTLE
SikaPrimer 207 - 250ml Bottle - 6/cs 587329

Sika® Primer-207

Pigmented, solvent-based Primer for various substrates
Sika® Primer-207 is a solvent-based black primer, which reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives.
Sika® Primer-207 is specifically formulated for the treatment of bond faces prior to application of Sika’s 1-component Polyurethanes. This primer might provide excellent adhesion without previous activation step on many substrates. Sika® Primer-207 fluoresces under long-wave UV light for a limited period of time. This feature is used for in-process control.
Read less -
  • Enhanced adhesion on a wide variety of substrates
  • Visible under UV light
  • Easy to use

PRODUCT BENEFITS

  • Enhanced adhesion on a wide variety of substrates
  • Visible under UV light
  • Easy to use
 

Usage

Sika® Primer-207 is used to improve adhesion on a very broad range of different substrates such as float glass, ceramic-coated glass, plastics, pre-coatings, painted surfaces, E-coats and metals.
Seek manufacturer’s advice and perform tests on original substrates before using Sika® Primer-207 on materials prone to stress cracking.
This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.

Advantages

  • Enhanced adhesion on a wide variety of substrates
  • Visible under UV light
  • Easy to use
 

Packaging

Can

250 ml
1 000 ml

Product Details

Typical Product Data
Chemical base

Solvent-based Polyurethane solution

Color (CQP001-1)

Black

Solid content

27 %

Application temperature

5 - 40 °C

Application method

Brush, felt or foam applicator

Consumption

depending on substrate porosity

50 ml/m2

Flash-off time

above 5 °C

maximum

10 minutes A

24 hours A

Shelf life (CQP016-1)

1000 ml

smaller packagings

9 months B

12 months B

CQP = Corporate Quality Procedure

A) for specific application, temperature and flash-off time may be different

B) stored in sealed container in up-right position in a dry place ≤ 25 °C

Application

Application Information

METHOD OF APPLICATION

Surfaces must be clean, dry and free from grease, oil, dust and contaminants.
Adhesion on substrates may be improved by adding and/or combining pre-treatment processes such as scuffing, cleaning and activating.

Application

Shake the Sika® Primer-207 can very thoroughly until mixing balls rattle freely. Continue shaking for another minute and apply a thin but covering coat with a brush, felt or foam applicator.
Ideal application and surface temperature are between 15 °C and 25 °C.
Sika® Primer-207 has to be applied once only. Care must be taken to ensure that this single application gives adequately dense coverage. Consumption and method of application depend on the specific nature of the substrates. Tightly reseal container immediately after each use.


Call for Pricing
In Stock
UOM : BO
QTY:

Have Questions?

Ask our experts: