Cutler-Hammer DP Series DPU222RP Non-Fusible, Pull-Out Disconnect Switch, 120/240 V, 60 A, 2-Pole, 3R
Item #:
80059383
Product Info
DPU222RP
CUTLER-HAMMER
10323 SWITCH AC DISC NFUSD 2P 2W 60A
Cutler-Hammer DP Series DPU222RP Non-Fusible, Pull-Out Disconnect Switch, 120/240 V, 60 A, 2-Pole, 3R
Single phase, 2 pole, 2 wire, 240 volt AC, galvanized steel enclosure with molded case switch. Rated 3 HP at 120 volt, 10 HP at 240 volt. For bottom entry and exit only. Heavy duty, high strength enclosure with welded and riveted construction. Swing-up cover remains in place when in open position, and includes provision for padlocking. 10,000 AIR. When pullout is in off position, protective shield can be removed for access to fuses. No.GB4 ground bar and No.96-3258-4 pullout head replacement sold separately. #14-3 AWG wire range. 5-3/8 x 8-3/4 x 3-1/8. UL Listed file No.E5239.On/Off control provided by a pullout handleOn/Off control provided by a pullout handle Pullout handle can be stored in the OFF position, helping to prevent misplacement Protective shield cannot be removed until the pullout handle is removed, disconnecting the power
Color | Gray |
Current Rating | 60 A |
Enclosure Material | Steel |
Height | 3.43 in |
HP Rating | 10 hp |
Length | 5.4 in |
Nema Rating | NEMA 3R |
Number of Phases | 1 |
Number of Poles | 2 |
Number Of Wires | 2 |
Type | Non-Fused Pullout |
Voltage Rating | 120/240 V |
Wattage Rating | 14400 W |
Width | 3.15 in |
Item Specifications
-
DISCONNECT SWITCHES
-
3.00 lbs per EA
$18.49
Available to Order (Non Stockable)
UOM : EA
QTY: