UGL DRYLOK 27613 Masonry Waterproofer, Liquid, Gray, 1 gal Pail
Item #:
80032525
Product Info
27613
UNITED GILSONITE
27613 WATERPROOFER MSNRY INT EXT GAL
UGL DRYLOK 27613 Masonry Waterproofer, Liquid, Gray, 1 gal Pail; 1 EA = 1 GAL; 2EA/SHELF PACK
Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity.Guaranteed to stop waterGuaranteed to stop water Helps protect against radon gas penetration by reducing vapor transfer Low-odor formula complies with all current VOC requirements Breathable film will not trap moisture in the masonry Easy cleanup with warm, soapy water Four Ready-mixed, flat finish colors No pre-mixing or pre-wetting DRYLOK latex base masonry waterproofer may be top coated with a good quality latex paint for decorative purposes
Applicable Materials | Acrylic Cement PVC |
Application Method | Brush Roller Spray |
Application Temperature | 50 deg F |
Base Type | Latex |
Boiling Point | 100 deg C |
Color | Gray |
Compositions | Quartz Limestone Mica Diethylene Glycol Monomethyl Ether Titanium Dioxide |
Container Type | Pail |
Coverage Area | 75 to 100 sq-ft/gal |
Density | 12.7 to 12.8 lb/gal |
Drying Time | 2 to 3 hr 30 min Touch 3 hr Recoat |
Flash Point | 5001 deg C |
Form | Liquid |
Net Content | 1 gal |
Odor/Scent | Ammonia |
pH Range | 9.5 to 9.9 |
Resists | Hydrostatic Pressure Wind Driven Rain |
Specific Gravity | 1.5 |
Viscosity | 110 to 120 ku |
VOC Content | 100 g/L |
Item Specifications
-
MASONRY SEALERS
-
7.00 lbs per EA
Call for Pricing
NOT IN STOCK
UOM : SHPK (2 EA)
QTY: