Milwaukee 6955-20 Miter Saw, 6 in Vertical, 13.500 in at 90 deg Cross-Cut in Cutting, 12 in Dia Blade, 1-Speed

The Miter Angle Digital Readout provides repeatable accuracy to 0.1 degree. Miter Angle Fine Adjust with Detent Override makes it simple to dial in precise miter angles. Dual Integral Jobsite Lights fully illuminate the work piece and cut line from either side of the blade. The powerful 15.0 Amp, 3.3 Max HP Direct Drive Motor provides increased power for high performance cutting in hard lumber. Constant Power Technology with Soft Start maintains constant cutting speed under load and decreases start up head movement. The Integral Dust channel captures up to 75 percent of the dust and debris cut. SPECIFICATIONS: Amps: 15.0; No Load Speed: 3,200 RPM; Blade Diameter: 12; Arbor Size: 5/8 or 1; Miter Range: 55 degrees Left to 60 degrees Right; Bevel Range: 48 degrees Left to 48 degrees Right; Miter Stops: Left-0 degrees, 15 degrees, 22.5 degrees, 31.6 degrees, 45 degrees, 55 degrees; Right-0 degrees, 15 degrees, 22.5 degrees, 31.6 degrees, 45 degrees, 60 degrees; Bevel Stops: Left-0 degrees, 15 degrees, 22.5 degrees, 33.85 degrees, 45 degrees, 48 degrees Right-0 degrees, 15 degrees, 22.5 degrees, 33.85 degrees, 45 degrees, 48 degrees. Tool Weight 65 lbs. INCLUDES: Carbide Tipped Blade; Dust Bag; Blade Wrench.Miter angle digital readout provides repeatable accuracy to 0.1 deg

Miter angle digital readout provides repeatable accuracy to 0.1 deg

Dual integral jobsite lights fully illuminate the work piece and cut line from either side of the blade

Constant Power TechnologyG maintains constant speed under load for unmatched cutting performance

Dual horizontal steel rails with three large linear bearings deliver smooth sliding action

Miter angle fine adjust with detent override makes it simple to dial-in precise miter angles

Powerful 15 A, 3.3 hp direct drive motor provides increased power for high-performance cutting in hard lumber

Integral dust channel captures up to 75% of the dust and debris cut

Oversized single lever bevel adjustment with 9 positive bevel stops allow the saw to easily bevel left and right 0 to 48 deg thereby provides fast and accurate adjustments