BrassCraft ProCoat CSSL54-18 Straight Gas Connector, 1/2 in Inlet, 1/2 in Outlet, Stainless Steel
Item #:
80017359
Product Info
11364 CONNECTOR GAS CSS SS 1/2FXM 18
BrassCraft ProCoat CSSL54-18 Straight Gas Connector, 1/2 in Inlet, 1/2 in Outlet, Stainless Steel; 25EA/SHELF PACK
BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind, The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
- 1/4 in ID (3/8 in OD) corrugated stainless steel with corrosion resistant coating
- Ideal for low demand appliances such as dryers, decorative stoves and gas log fireplaces
- Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures
- ProCoat coating corrosion resistant to harsh chemicals as well as UV rays and salt
- Smooth, burnished connector ends seal with less torque, making installation easier
- High tensile strength stainless steel is less susceptible to work hardening
- Deep corrugations enhance flexibility and maneuverability of connector during installation
- Gas connector is 100% leak tested
- For low demand appliances such as dryers, decorative stoves and gas log fireplaces
Connection Type | FIP x MIP |
Inside Diameter | 1/4 |
Length | 18 |
Material | Stainless Steel |
Nominal Size | 1/2 |
Operating Temperature | -40 to 150 |
Outside Diameter | 3/8 |
Pressure Rating | 0.5 |
Item Specifications
-
FLEXIBLE STAINLESS GAS SUPPLYS
-
0.44 lbs per EA
Call for Pricing
NOT IN STOCK
UOM : EA
QTY: