Eaton Wiring Devices OS310U-V-K Motion Sensor Switch with Nightlight and LED, 30 s to 30 min, 600 W, Ivory

For incandescent, Magnetic Low Voltage (MLV), Electronic Low Voltage (ELV), fluorescent, compact fluorescent, LED and motors up to 1/6 HP. Includes selectable and dimmable nightlight. Turns on automatically when a person enters the room, automatically turn off lights after a selectable time delay of 5 seconds (Test Mode), 5 minutes (factory default), 15 minutes and 30 minutes. Detects when the room is occupied very briefly and shortens the time delay in order to save energy, includes a light level adjustment for daylight to prevent motion from turning on the lights. Provides 180 degree field of view and 1000 square feet of major motion coverage. Includes a decorator mid-size wallplate. A green LED indicates load status, provides locator light in dark and blinks to indicate motion detection. 8.3 amp, 1000 watts, 120 volts AC, 60 Hz. 6 pre-stripped wire leads, #14 AWG. cULus Listed, NOM Certified, California Title 24 Compliant. Temperature rating 32 to 104 degrees F.Can be wired as a single pole or 3-way device

Can be wired as a single pole or 3-way device

Selectable On/Off LED nightlight with press and hold dimming function

Green LED indicates load status, provides locator light in dark and blinks to indicate motion detection

Push pad design provides minimal travel and crisp actuation

Replaces a standard light or fan switch

Occupancy sensor provides a selectable ambient light override preventing lights from switching on, when there is acceptable natural light

Occupancy sensor version allows to toggle between auto-On/Off or manual-On/auto-Off mode with a simple press and hold of switch

Occupancy sensor provides for a bypass feature to allow the sensor to perform as a traditional switch

Electrostatic discharge protection